Quiz-summary
0 of 100 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
Information
Welcome to our SSC JE Civil Engineering 2019 Mock test objective Paper
This test will cover almost all topics
This test covers 100 Questions and 4 Options.
You have only 75 Minutes time to complete the test
Its very intresting mock test! Take and analyse your skill level
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 100 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Categories
- Civil 0%
-
Thanks for taking the test!
Have a nice day!
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- Answered
- Review
-
Question 1 of 100
1. Question
If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the
pre-stressed beam is L, the upward uniform pressure will beCorrect
Incorrect
-
Question 2 of 100
2. Question
If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is
10 kg/cm2, the length of the beam having nominal reinforcement, isCorrect
Incorrect
-
Question 3 of 100
3. Question
If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance V from either end where, V is
Correct
Incorrect
-
Question 4 of 100
4. Question
If the maximum spring rise is 2 m and height of the waves expected is 4 m , then the breakwater height above the datum will be
Correct
Incorrect
-
Question 5 of 100
5. Question
If the modular ratio is ‘m’ , steel ratio is’ r’ and overall depth of a beam is ‘d’ , the depth of the
critical neutral axis of the beam, isCorrect
Incorrect
-
Question 6 of 100
6. Question
If the moment of inertia of a section about its axis is T and its effective sectional area is TT, its radius of gyration Y about the axis, is
Correct
Incorrect
-
Question 7 of 100
7. Question
If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is
Correct
Incorrect
-
Question 8 of 100
8. Question
If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in
Correct
Incorrect
-
Question 9 of 100
9. Question
If the normal cross-section ‘A’of a member is subjected to tensile force , p, the resulting normal stress in an oblique plane inclined at angle ‘θ’ to transverse plane will be
Correct
Incorrect
-
Question 10 of 100
10. Question
If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m
Correct
Incorrect
-
Question 11 of 100
11. Question
If the optimum depth of kor watering for a crop is 15.12 cm, the outlet factor for the crop for four week period in hectares per cumec, is
Correct
Incorrect
-
Question 12 of 100
12. Question
If the ore impurities is
Correct
Incorrect
-
Question 13 of 100
13. Question
If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be
Correct
Incorrect
-
Question 14 of 100
14. Question
If the over land flow from the critical point to the drain is 8 km and the difference in level is 12.4 m, the inlet time is
Correct
Incorrect
-
Question 15 of 100
15. Question
If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is
Correct
Incorrect
-
Question 16 of 100
16. Question
If the permeability of a soil is 0.8 mm/sec, the type of soil is
Correct
Incorrect
-
Question 17 of 100
17. Question
If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and
1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required
for an economic section, isCorrect
Incorrect
-
Question 18 of 100
18. Question
If the permissible compressive stress for a concrete in bending is C kg/m2, the modular ratio is
Correct
Incorrect
-
Question 19 of 100
19. Question
If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly
reinforced rectangular balanced section will beCorrect
Incorrect
-
Question 20 of 100
20. Question
If the pH value of sewage is 7
Correct
Incorrect
-
Question 21 of 100
21. Question
If the pitch is 6 cm and rivet value is 4 tonnes, the number of rivets required for a riveted connection carrying an eccentric load of 15 tonnes at a distance of 30 cm from the centre line, is
Correct
Incorrect
-
Question 22 of 100
22. Question
If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for
Correct
Incorrect
-
Question 23 of 100
23. Question
If the plasticity index of a soil mass is zero, the soil is
Correct
Incorrect
-
Question 24 of 100
24. Question
If the radii of a compound curve and a reverse curve are respectively the same, the length of common tangent
Correct
Incorrect
-
Question 25 of 100
25. Question
If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is
Correct
Incorrect
-
Question 26 of 100
26. Question
If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is taken
Correct
Incorrect
-
Question 27 of 100
27. Question
If the radius of curvature of a hill road is 50 m, the percentage grade compensation should be
Correct
Incorrect
-
Question 28 of 100
28. Question
If the radius of the earth is 600 km the height of a mountain above sea level at the top of which a beat seconds pendulum at sea level, looses 27 seconds a day, is
Correct
Incorrect
-
Question 29 of 100
29. Question
If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is
Correct
Incorrect
-
Question 30 of 100
30. Question
If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is
Correct
Incorrect
-
Question 31 of 100
31. Question
If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is
Correct
Incorrect
-
Question 32 of 100
32. Question
If the ratio of center to center spacing of intersecting walls to actual thickness of intersecting wall
is more than 20, then the stiffening coefficient for wall proper will beCorrect
Incorrect
-
Question 33 of 100
33. Question
If the ratio of long and short spans of a two way slab with corners held down is r, the actual
reduction of B.M. is given byCorrect
Incorrect
-
Question 34 of 100
34. Question
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will
ordinarily be satisfactory in case of aCorrect
Incorrect
-
Question 35 of 100
35. Question
If the resultant of two forces has the same magnitude as either of the force, then the angle between the two forces is
Correct
Incorrect
-
Question 36 of 100
36. Question
If the ruling gradient on any highway is 3%, the gradient provided on the curve of 300 metre radius, is
Correct
Incorrect
-
Question 37 of 100
37. Question
If the sand in-situ is in its densest state, then the relative density of sand is
Correct
Incorrect
-
Question 38 of 100
38. Question
If the scheduled completion time of a project is more than the earliest expected time for completion of the project, then the probability of completion of the project within the scheduled completion time will be
Correct
Incorrect
-
Question 39 of 100
39. Question
If the sewage contains grease and fatty oils, these are removed in
Correct
Incorrect
-
Question 40 of 100
40. Question
If the shear stress in a R.C.C. beam is
Correct
Incorrect
-
Question 41 of 100
41. Question
If the shearing stress is zero on two planes, then the angle between the two planes is
Correct
Incorrect
-
Question 42 of 100
42. Question
If the side of a square sewer is 1000 mm, the diameter of a hydraulically equivalent circular section, is
Correct
Incorrect
-
Question 43 of 100
43. Question
If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by
Correct
Incorrect
-
Question 44 of 100
44. Question
If the size of a column is reduced above the floor, the main bars of the columns, are
Correct
Incorrect
-
Question 45 of 100
45. Question
If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of
column strip and middle strip areCorrect
Incorrect
-
Question 46 of 100
46. Question
If the slump of a concrete mix is 60 mm, its workability is
Correct
Incorrect
-
Question 47 of 100
47. Question
If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as
Correct
Incorrect
-
Question 48 of 100
48. Question
If the specific capacity of a well is 0.3183 x 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is
Correct
Incorrect
-
Question 49 of 100
49. Question
If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is
Correct
Incorrect
-
Question 50 of 100
50. Question
If the standard length of a B.G. crossing is 597 cm, the number of crossing, is
Correct
Incorrect
-
Question 51 of 100
51. Question
If the standard length of a crossing is 480 cm, the number of crossing is
Correct
Incorrect
-
Question 52 of 100
52. Question
If the stock rails are B.H. rails, the type of switch generally provided, is
Correct
Incorrect
-
Question 53 of 100
53. Question
If the storey height is equal to length of RCC wall, the percentage increase in strength is
Correct
Incorrect
-
Question 54 of 100
54. Question
If the straight sides of a triangular section of a lined canal with circular bottom of radius D, make an angle 0 with horizontal, the hydraulic mean depth is
Correct
Incorrect
-
Question 55 of 100
55. Question
If the straight sides of a triangular section of a lined canal with circular bottom of radius R, make an angle 6 with horizontal, the perimeter of the canal is
Correct
Incorrect
-
Question 56 of 100
56. Question
If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N)
Correct
Incorrect
-
Question 57 of 100
57. Question
If the stress in each cross-section of a pillar is equal to its working stress, it is called
Correct
Incorrect
-
Question 58 of 100
58. Question
If the surface of liquid is convex, men
Correct
Incorrect
-
Question 59 of 100
59. Question
If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a
rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme
top edgeCorrect
Incorrect
-
Question 60 of 100
60. Question
If the tension in a cable supporting a lift moving upwards is twice the tension when the lift is moving downwards, the acceleration of the lift, is
Correct
Incorrect
-
Question 61 of 100
61. Question
If the thickness of a structural member is small as compared to its length and width, it is classified as
Correct
Incorrect
-
Question 62 of 100
62. Question
If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be
Correct
Incorrect
-
Question 63 of 100
63. Question
If the thickness of thinnest outside plate is 10 mm, then the maximum pitch of rivets in tension will be taken as
Correct
Incorrect
-
Question 64 of 100
64. Question
If the time of concentration is 9 minutes, then the intensity of rainfall according to British Ministry of Health formula will be
Correct
Incorrect
-
Question 65 of 100
65. Question
If the total float and duration of an activity are 5 and 10 days respectively, the particular activity can be
Correct
Incorrect
-
Question 66 of 100
66. Question
If the total hardness of water is greater than its total alkalinity, the carbonate hardness will be equal to
Correct
Incorrect
-
Question 67 of 100
67. Question
If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is
Correct
Incorrect
-
Question 68 of 100
68. Question
If the unsupported length of a stanchion is 4 metres and least radius of gyration of its cross-section is 5, the slenderness ratio of the stanchion, is
Correct
Incorrect
-
Question 69 of 100
69. Question
If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the
grade of concrete, isCorrect
Incorrect
-
Question 70 of 100
70. Question
If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is
Correct
Incorrect
-
Question 71 of 100
71. Question
If the voids of a soil mass are full of air only, the soil is termed as
Correct
Incorrect
-
Question 72 of 100
72. Question
If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are
Correct
Incorrect
-
Question 73 of 100
73. Question
If the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is
Correct
Incorrect
-
Question 74 of 100
74. Question
If the water table rises upto ground surface, then the
Correct
Incorrect
-
Question 75 of 100
75. Question
If the whole circle bearing of a line is 270°, its reduced bearing is
Correct
Incorrect
-
Question 76 of 100
76. Question
If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2, spacing of 10 mm tie bars for the longitudinal joint, is
Correct
Incorrect
-
Question 77 of 100
77. Question
If the width of a simply supported beam carrying an isolated load at its centre is doubled, the
deflection of the beam at the centre is changed byCorrect
Incorrect
-
Question 78 of 100
78. Question
If the width of a simply supported beam carrying an isolated load at its centre is doubled, the
deflection of the beam at the centre is changed byCorrect
Incorrect
-
Question 79 of 100
79. Question
If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is
Correct
Incorrect
-
Question 80 of 100
80. Question
If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be
Correct
Incorrect
-
Question 81 of 100
81. Question
If the width of the foundation for two equal columns is restricted, the shape of the footing
generally adopted, isCorrect
Incorrect
-
Question 82 of 100
82. Question
If there are’m’ unknown member forces, V unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by
Correct
Incorrect
-
Question 83 of 100
83. Question
If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow:
Correct
Incorrect
-
Question 84 of 100
84. Question
If three rigid rods are hinged together to form a triangle and are given rotary as well as translatory motion, the number of instantaneous centres of the triangle, will be
Correct
Incorrect
-
Question 85 of 100
85. Question
If Ti’ is the difference in level between end points separated by 7′, then the slope correction is [(h2/2/) + (h4/8/3)]. The second term may be neglected if the value of 7>’ in a 20 m distance is less than
Correct
Incorrect
-
Question 86 of 100
86. Question
If TL is the latest allowable event occurrence time, total activity slack(s), is equal to
Correct
Incorrect
-
Question 87 of 100
87. Question
If to, tp and tm are the optimistic, pessimistic and most likely time estimates of an activity respectively, the expected time t of the activity will be
Correct
Incorrect
-
Question 88 of 100
88. Question
If two forces acting at a point are in equilibrium, they must be equal in magnitude and their line of action must be along
Correct
Incorrect
-
Question 89 of 100
89. Question
If two forces are in equilibrium, then the forces must
(i) Be equal in magnitude
(ii) Be opposite in sense
(iii) Act along the same line The correct answer isCorrect
Incorrect
-
Question 90 of 100
90. Question
If two forces of 3 kg and 4 kg act at right angles to each other, their resultant force will be equal to
Correct
Incorrect
-
Question 91 of 100
91. Question
If two points differing by 1° of latitude and of the same longitude is 110 km apart on the earth, then two astronomical positions on the moon is about
Correct
Incorrect
-
Question 92 of 100
92. Question
If V is speed in km/hour and R is radius of the curve, the super-elevation e is equal to
Correct
Incorrect
-
Question 93 of 100
93. Question
If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is
Correct
Incorrect
-
Question 94 of 100
94. Question
If V is the design speed in km/hour and R is the radius of the curve of a hill road, the superelevation
Correct
Incorrect
-
Question 95 of 100
95. Question
If V is the design speed of vehicles in km/hour, the change of radial acceleration in metres/sec3, is
Correct
Incorrect
-
Question 96 of 100
96. Question
If V is the rugosity coefficient, Y is the hydraulic depth, ‘s’ is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by
Correct
Incorrect
-
Question 97 of 100
97. Question
If V is the velocity in kmph, t the brake reaction time in seconds and rj the efficiency of the brakes, the stopping distance S of the vehicle, is
Correct
Incorrect
-
Question 98 of 100
98. Question
If v, t and f/H are the ground speed of the aircraft, the shutter speed of the camera and the scale of the photograph respectively, then the amount of image displacement
Correct
Incorrect
-
Question 99 of 100
99. Question
If V0 is the critical velocity of a channel, its silt transporting power, according to Kennedy, is proportional to
Correct
Incorrect
-
Question 100 of 100
100. Question
If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on
Correct
Incorrect