The Indian standard code which deals with steel structures, is

The individual variation between test strength of sample should not be more than

The infrared portion of EMR lies between

The inherent property of a body which offers reluctance to change its state of rest or uniform motion, is

The initial setting time for ordinary Portland cement as per IS specifications should not be less
than

The initial setting time of hydraulic lime, is

The initial setting time of lime-pozzolana, is

The inner section of a cavity wall, is generally known as

The inspection pit or chamber is a manhole provided in a base drainage system

The instantaneous centre of a member lies at the point of intersection of two lines drawn at the ends of the member such that the lines are inclined to the direction of motion of the ends at

The instrument used for accurate centering in plane table survey is

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as

The instruments which provide electromagnetic radiation of specified wave length or a band of wave lengths to illuminate the earth surface are called:

The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is kept

The intensity of irrigation means

The intensity of pressure at any point, in a liquid, is

The intensity of pressure at any point, in a liquid, is to the depth of liquid from the surface.

The intensity of pressure on an immersed surface with the increase in depth.

The intensity of rain is expressed in

The interaction of the electromagnetic radiation produced with a specific wave length to illuminate a target on the terrain for studying its scattered radiance, is called:

The intercept of a staff

The internal dimensions of a ware house are 15 m × 5.6 m, and the maximum height of piles is
2.70 m, the maximum number of bags to be stored in two piles, are

The internal molecular attraction of a soil, the cohesion

The internal pressure coefficient on walls for buildings with large permeability is taken as

The internal size of mould used in brick preparation is

The inventor of road making as a building science, was

The inventor of the term soil mechanics, was

The item of steel work which is measured in sq.m, is

The item of the brick structure measured in sq.m, is

The joint used for joining the plain ends of cast iron pipes, is

The kiln which may work throughout the year, is

The kinematic viscosity is the

The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is

The Lacey’s regime velocity is proportional to

The landing and takeoff of the air craft is made against the direction of wind. In no case the centre line of the runway should make an angle with the wind direction exceeding

The lateral earth pressure on a retaining wall

The latitude (ʎ) of a place and the altitude (α) of the pole are related by

The latitude of a place was obtained by subtracting the declination of a star from its zenith distance, the observed star was between

The latitude of a place was obtained by subtracting the zenith distance of a star from its declination, the observed star was between

The latitude of the observer’s position, is

The Law of Polygon of Forces states that

The layers of vegetable wastes and night soil alternatively piled above the ground to form a mound, is called

The laying of sewers is done with

The layout of distribution system in which water flows towards the outer periphery is

The least bearing capacity of soil is that of

The least count of a Vernier scale is

The least dimension in case of a circular column of diameter ‘D’ is taken as

The least permissible clear dimension of the web of thickness t in the panel of a plate girder, is restricted to

The least thickness of class B cast iron (spun) pipe, is

The length and width of a meander and also the width of the river, vary roughly as

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends
are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximum
crippling load will be

The length of a liquid stream while flowing over a weir at the ends of the sill.

The length of a meander is the distance along the river between the tangent point of one curve to the tangent point of

The length of a parallel of ^latitude between two meridians is equal to difference in longitudes multiplied by

The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is

The length of a Second’s pendulum, is

The length of a transition curve, is governed by

The length of a traverse leg may be obtained by multiplying the latitude and

The length of clear zone for none instrument runway of a small aircraft is

The length of lap in tension reinforcement should not be less than the bar diameter × (actual
tension / four times the permissible average bond stress) if it is more than

The length of rectangular sedimentation tank should not be more than( Where B is the width of the tank)

The length of runway is increased per 300 m rise above M.S.L.

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be

The length of the divergent cone in a Venturimeter is that of the convergent cone.

The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or

The length of the side of warning sign boards of roads is

The length of the straight portion of a bar beyond the end of the hook, should be at least

The length/diameter ratio of cylindrical specimens used in triaxial test, is generally

The lengths of the standard crossings in India for Broad gauge and Metre gauge tracks is same for

The lens equation 1/f = 1//, + 1//2 is applicable

The level of the floor of a syphon aqueduct can be obtained

The level of underground water is called

The life of a wooden sleeper depends upon

The lift off distance is the distance along the centre of the runway between the starting point and

The light weight aggregates are obtained from

The lime which contains high percentage of calcium oxide, is generally called

The lime which contains mainly calcium oxide and slacks with water, is

The limiting length of an offset does not depend upon

The limiting value of cant deficiency for Meter Gauge routes is

The limiting value of cant excess for Broad Gauge is

The limiting value of cant gradient for all gauges is

The limits of percentage p of the longitudinal reinforcement in a column is given by

The line normal to the plumb line is known as

The line of action of the buoyant force acts through the

The line of action of the buoyant force acts through the Centroid of the

The line of collimation method of reduction of levels, does not provide a check on

The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is

The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to

The lintels are preferred to arches because

The liquid limit and plastic limit exist in

The liquid used in manometers should have

The liquid wastes from kitchens, bath rooms and wash basins, is not called

The liquidity index is defined as a ratio expressed as percentage of

The live load for a sloping roof with slope 15°, where access is not provided to roof, is taken as

The live load to be considered for an accessible roof, is

The live load to be considered for an inaccessible roof, is

The load carrying capacity of a helically reinforced column as compared to that of a tied column is
about

The load factors for live load and dead load are taken respectively as

The load on a lintel is assumed as uniformly distributed if the height of the masonry above it, is upto a height of