# [Mock Test] Theory of Structures Mock test – 3 || Civil Engineering Mock tests

Here you can access the Civil Engineering important mock test in the topic of Docks and Harbour Engineering. This test useful for SSC JE, ESE, AE, PSUs and All Civil competitive exams.

###### Wish you all the best!!!
Name
Email
1. The ratio of crippling loads of a column having both the ends fixed to the column having both the ends hinged, is
2. The ratio of maximum and average shear stresses on a rectangular section, is
3. A body is said to be in equilibrium if
4. In a shaft, the shear stress is not directly proportional to
5. A compound truss may be formed by connecting two simple rigid frames, by
6. At any point of a beam, the section modulus may be obtained by dividing the moment of inertia of the section by
7. Slenderness ratio of a long column, is
8. Maximum strain theory for the failure of a material at the elastic limit, is known as
9. For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is
10. The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is
11. The load on a spring per unit deflection, is called
12. m1 and m2 are the members of two individual simple trusses of a compound truss. The compound truss will be rigid and determinate if
13. The normal and tangential components of stress on an inclined plane through θ° to the direction of the force, will be equal if θ is
14. In case of principal axes of a section
15. The locus of the moment of inertia about inclined axes to the principal axis, is

### Best Civil Engineering Ebook Pdf

Total MCQs :15000
Total Pages :2279
Total Size :37 Mb