[Mock Test ] Strength of Materials Mock test – 2 | Civil Engineering Online Tests

Here you can access very important online free Civil Engineering Mock test in the topic of Strength of Materials. This test will be very useful for all kind of examinations such as SSC JE, ESE, GATE, State Level Assistant Engineers, Central Level Assistant Engineers and PSUs exams.

Welcome to your Strength of Materials Mock test -2

Take an exciting test in Strength of Materials.

You have only 20 mins to complete the test (25 Questions)

Wish you all the best!!!

Name
Email
1. The maximum bending moment due to a moving load on a simply supported beam, occurs
2. A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x-times the linear strain in any of the three axes when
3. The law which states, "within elastic limits strain produced is proportional to the stress producing it", is known as
4. In a bar of large length when held vertically and subjected to a load at its lower end, its own-weight produces additional stress. The maximum stress will be
5. A cylinder is said to be thin if the ratio of its thickness and diameter, is less than
6. A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of
7. An arch may be subjected to
8. When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called
9. For structural analysis of forces, the method refers to
10. The number of points of contraflexure in a simple supported beam carrying uniformly distributed load, is
11. In a three hinged arch, the third hinge is generally kept at
12. In rectangular columns (cross-section b x h), the core is a
13. If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists.
14. If a constant section beam is subjected to a uniform bending moment throughout, its length bends to
15. The phenomenon of slow extension of materials having constant load, i.e. increasing with the time is
16. The maximum resistance against rotation, is offered by the weld at a point
17. Struts are load carrying members of a frame structure which are subjected to
18. In a three hinged arch, the shear force is usually
19. n and j are numbers of members and joints in a frame. It contains redundant members if
20. A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at
21. The type of butt joints in common use, is :
22. Stress in a beam due to simple bending, is
23. An arch with three hinges, is a structure
24. The shear force on a simply supported beam is proportional to
25. The materials which have the same elastic properties in all directions, are called