SSC JE Civil Preliminary Exam in January 2018 | Practice test Day – 59



Welcome to your SSC JE Civil 2018 Objective Exam Practice test Day - 59
Take an exciting test in SSC JE Civil Preliminary Exam in January 2018. 
You have only 20 mins to complete the test (25 Questions)
Wish you all the best!!!
Name
Email
1. A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as
2. In jack arch floor, the rise is kept
3. The compaction of concrete in the drilled pile hole is done by compressed air in the case of
4. The brick laid with its length parallel to the face of a wall, is a known as
5. The portion of a brick cut across the width, is called
6. Expansion joints in masonry walls are provided if length exceeds
7. The inclined support at the ends of treads and rises of a stair, is known as
8. Pile foundations are suitable for
9. The triangular portion between any two adjacent arches and the tangent to their crowns, is
10. The under surface of an arch, is called
11. A floor constructed with 3 mm marble chips, is known
12. The vertical side member of a shutter frame, is known
13. Black cotton soil is unsuitable for foundations because its
14. In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used
15. In verandah floors outward slope is
16. The brick laid with its breadth parallel to the face of a wall, is known as
17. The voussoir placed at crown of an arch, is known as a
18. The type of bond in which every course contains both headers and stretchers, is called
19. The stone whose crushing strength is least, is
20. In horizontal D.P.C, thickness of cement concrete (1 : 2 : 4) is
21. Crown is located at
22. You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is
23. The local swelling of a finished plaster, is termed
24. To support a heavy structure in sandy soil, the type of foundation generally used, is
25. The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as



Share to all