#### Subscribe and get latest posts and study materials to your mail & dont forget to verify ur mail after subscription.

Enter your email address: Delivered by FeedBurner

# SSC JE Civil Engineering Preliminary Exam in January 2018 | Practice test Day – 30

###### Wish you all the best!!!
Name
Email
1. In a shaft rotated by a couple, the shear force varies
2. The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, is
3. A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its  entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be
4. The cross sections of the beams of equal length are a circle and a square whose permissible  bending stress is same under same maximum bending. The ratio of their flexural weights is,
5. For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be
6. If a shaft is simultaneously subjected to a toque T and a bending moment M, the ratio of  maximum bending stress and maximum shearing stress is
7. A solid cube is subjected to equal normal forces on all its faces. The volumetric strain will be x- times the linear strain in any of the three axes when
8. A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is
9. If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by
10. A cantilever carrying a uniformly distributed load W over its full length is propped at its free end  such that it is at the level of the fixed end. The bending moment will be zero at its free end also at
11. If the width of a simply supported beam carrying an isolated load at its centre is doubled, the  deflection of the beam at the centre is changed by
12. When a rectangular beam is loaded transversely, the maximum compressive stress develops on
13. For a simply supported beam carrying uniformly distributed load W on it entire length L, the  maximum bending moment is
14. The moment diagram for a cantilever carrying linearly varying load from zero at its free end and to maximum at the fixed end will be a
15. If the width of a simply supported beam carrying an isolated load at its centre is doubled, the  deflection of the beam at the centre is changed by
16. A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the  corresponding maximum shearing stress being 30 kg/cm2. The depth of the beam is
17. When a rectangular beam is loaded longitudinally, shear develops on
18. Along the principal plan subjected to maximum principal stress
19. The width of a beam of uniform strength having a constant depth d length L, simply supported at  the ends with a central load W is
20. A member which does not regain its original shape after removed of load producing deformation is said

Share to all

#### Be the first to commenton "SSC JE Civil Engineering Preliminary Exam in January 2018 | Practice test Day – 30"

Subscribe and get the latest posts and study materials to your mail!

Enter your email address:

Delivered by FeedBurner

// hide the meta tag generator from head and rss function disable_meta_generator() { return ''; } add_filter('the_generator','disable_meta_generator'); remove_action('wp_head', 'wp_generator');