# SSC JE Civil Engineering Preliminary Exam in January 2018 | Practice test Day – 21

###### Wish you all the best!!!
Name
Email
1. The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due  to flowing liquid, is
2. P=EI/L² is the equation of Euler's crippling load if
3. In case of a simply supported I-section beam of span L and loaded with a central load W, the  length of elasto-plastic zone of the plastic hinge, is
4. The ratio of crippling loads of a column having both the ends fixed to the column having both the  ends hinged, is
5. The yield moment of a cross section is defined as the moment that will just produce the yield  stress in
6. The ratio of lateral strain to axial strain of a homogeneous material, is known
7. Maximum strain theory for the failure of a material at the elastic limit, is known as
8. Maximum principal stress theory for the failure of a material at elastic point, is known
9. The strain energy stored in a spring when subjected to greatest load without being permanently  distorted, is called
10. Slenderness ratio of a long column, is
11. Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to
12. The load on a spring per unit deflection, is called
13. A cantilever of length is subjected to a bending moment at its free end. If EI is the flexural rigidity of the section, the deflection of the free end, is
14. A compound truss may be formed by connecting two simple rigid frames, by
15. A simply supported beam A carries a point load at its mid span. Another identical beam B carries  the same load but uniformly distributed over the entire span. The ratio of the maximum  deflections of the beams A and B, will be

Share to all

#### Be the first to commenton "SSC JE Civil Engineering Preliminary Exam in January 2018 | Practice test Day – 21"

Subscribe and get the latest posts and study materials to your mail!