SSC JE Civil Engineering Preliminary Exam 2018 | Practice test Day – 4

Welcome to your SSC JE Civil Engineering 2018 Objective Exam Practice test Day - 4
Take an exciting test in SSC JE Civil Preliminary Exam 2018. 
You have only 15 mins to complete the test (15 Questions)
Each questions are in Each 15 topics of SSC JE 2018 latest syllabus
Wish you all the best!!!
1. A one dimensional flow is one which
2. The brick work is not measured in cu m in case of
3. The water face of the guide banks, is protected by
4. The angle of internal friction, is least for
5. Contour interval is
6. The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are
7. In a gusseted base, when the end of the column is machined for complete bearing on the base plate, then the axial load is assumed to be transferred to base plate
8. While determining the yield of open wells by the pumping test
9. The coagulant which is generally not used for treating the sewage, is
10. A beam is said to be of uniform strength, if
11. The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as
12. For concreting of heavily reinforced sections without vibration, the workability of concrete expressed as compacting factor should be
13. If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is
14. The pile which supports the load due to friction between pile face and surrounding soil, is generally known as
15. If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is

Share to all