Hydrology & Water resource engineering Mock test – 3 || Civil Engineering Mock tests




Welcome to your Hydrology & Water resource engineering Mock test - 3
Take an exciting test in Hydrology & Water Resource engineering 
You have only 20 mins to complete the test (25 Questions)
Wish you all the best!!!
Name
Email
1. Hydrograph is a graphical representation of
2. Indian Meteorological department uses the standard gauges whose collectors have apertures of
3. According to Khosla theory  the exit gradient in the absence of a downstream cut-off is
4. For wave action in dams, the maximum height of freeboard is generally taken to be equal to
5. For the estimate of high floods in fan-shaped catchment, the formula used is
6. The run off a drainage basin is
7. Horizontal acceleration due to earthquake results in
8. Which of the following spillways is least suitable for an earthen dam?
9. The critical depth in a channel can be produced
10. The main function of a divide wall is to
11. A runoff river plant is
12. Tortuosity of a meandering river is always
13. If the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as
14. The major resisting force in a gravity dam is
15. The quantity of water retained by the sub-soil against gravity, is known
16. In India the recording type rain gauge generally used, is
17. Which of the following can be used as a meter fall?
18. Seepage through embankments in an earthen dam is controlled by
19. The net speed under which the turbine reaches its peak efficiency is called
20. If the axial length of a drainage basin is 35 km and its form factor is 0.2, the total area of the basin is
21. Sharp crested weirs are generally used
22. In the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable
23. Water contains
24. Which of the following canal outlets maintains a constant discharge?
25. The main cause of meandering is







Share to all